EXPERIMENTAL CHARACTERIZATION OF THE PERFORMANCES OF A STORAGE EXCHANGER WITH TUBE BANK AIR-PHASE CHANGE MATERIALS

S Ekomy Ango; D Bruneau; P Sebastian; R Moutou Pitti

doi:10.4314/njt.351.1046

EXPERIMENTAL CHARACTERIZATION OF THE PERFORMANCES OF A STORAGE EXCHANGER WITH TUBE BANK AIR-PHASE CHANGE MATERIALS

Authors

S Ekomy Ango INSTITUT DE RECHERCHES TECHNOLOGIQUES (IRT) B.P.14070 IRT, LIBREVILLE, GABON
D Bruneau LABORATOIRE I2M (UMR 8508) ARTS ET METIERS PARIS TECH – BORDEAUX, FRANCE
P Sebastian ESPLANADE DES ARTS ET METIERS 33405, TALENCE CEDEX, FRANCE
R Moutou Pitti INSTITUT DE RECHERCHES TECHNOLOGIQUES (IRT) B.P.14070 IRT, LIBREVILLE, GABON

DOI:

https://doi.org/10.4314/njt.351.1046

Keywords:

Air conditioning, Residential building, Modelling, Free-cooling, Phase change material

Abstract

This study aims to show the preliminary results of an improved components and characteristics of heat exchanger air and Phase Change Material (PCM)that was designed, dimensioned, manufactured and tested in the laboratory (with melting temperature ranging between 27-29° C), especially for refreshing semi-passive air in summer period. The preliminary results show that one of the exchanger’s storage of the system manages to refresh the air during about 8 - 10 hours. About 7-8 hours are needed to regenerate the PCM. The current (0.8) and the theoretical load lose (1) are appreciably the same. This system was integrated into a prototype of solar house of positive energy that has already been presented in Madrid in June 2010 during inter- university competition on Solar Decathlon in Europe (http://www.napevomo.com, www.sdeurope. org). Since there are still some issues with the ability of the containers system of the PCM to fill, drain, and dilate and conduct energy therefore further study may have to focus on the development of simulation model to overcome such weakness.

http://dx.doi.org/10.4314/njt.v35i1.7

Downloads

Issue

Vol. 35 No. 1 (2016)

Section

Chemical, Industrial, Materials, Mechanical, Metallurgical, Petroleum & Production Engineering

License

The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.

NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.

A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf

For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.

It is forbidden to publish the same research report in more than one journal.

How to Cite

EXPERIMENTAL CHARACTERIZATION OF THE PERFORMANCES OF A STORAGE EXCHANGER WITH TUBE BANK AIR-PHASE CHANGE MATERIALS. (2015). Nigerian Journal of Technology, 35(1), 43-47. https://doi.org/10.4314/njt.351.1046