Fuzzy-Logic Modelling for Quality Prediction of Smoked Tilapia (Oreochromis niloticus) Fish
Keywords:
Membership function, Fuzzy Inference System, Tilapia fish, Smoke dryingAbstract
Statistical modelling of hot smoke processing of pre-treated Tilapia (Oreochromis niloticus) fish was reportedly inaccurate, making it difficult to design, predict, and reproduce the finished product’s quality; hence, accurate modelling of this process is a gap in study. This study filled this gap and extended the literature by investigating the accuracy of artificial intelligent based model for the same process. Fuzzy inference system (FIS) model was developed using the already presented dataset in the literature from where inaccurate statistical models were reportedly derived. The dataset is on the effect of smoke temperature (80, 90 and 100OC) and smoke time (2.00, 2.50 and 3.00 h) on the gross energy value (GEV) (Kcal/g) and the overall acceptability (OA) properties of brined pre-solar dried and brined non-dried Tilapia (Oreochromis niloticus) fish. The efficiency of FIS membership function types (pimf, trimf and gbellmf) on the accuracy of the developed FIS model was also investigated. Coefficient of determination, root mean square error, individual percentage error and model accuracy were used to discern the model accuracy. Results showed that FIS had a modelling accuracy ( value) between 0.9873 and 0.9999 as against 0.1072 and 0.5800 reported for the statistical model. The results suggested that FIS model outperformed the statistical model of Tilapia (Oreochromis niloticus) smoke processing and it is recommended for process/product design, control, and standardization.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Nigerian Journal of Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.

