EVALUATION OF THE ENGINEERING PROPERTIES OF CASHEW KERNEL OBTAINED FROM DIFFERENT PLANTATIONS IN NSUKKA

Authors

  • NN Aneke AGRICULTURAL & BIORESOURCES ENGINEERING, UNIV. OF NIGERIA, NSUKKA, ENUGU STATE, NIGERIA
  • O Ojike AGRICULTURAL & BIORESOURCES ENGINEERING, UNIV. OF NIGERIA, NSUKKA, ENUGU STATE, NIGERIA
  • K Ozor AGRICULTURAL & BIORESOURCES ENGINEERING, UNIV. OF NIGERIA, NSUKKA, ENUGU STATE, NIGERIA

Keywords:

thermal, mechanical, physical, cashew, kernel, processing.

Abstract

In this study, the engineering properties of cashew kernels grown in Nsukka were evaluated. The experiments were carried out in replicates from different plantations in order to achieve near accurate average values. The results showed no significant difference in the physical and thermal properties while terminal velocity, coefficient of friction, compressive force and stress were significantly different. Thus, since the physical properties were significantly the same then a processing system developed using the property values of a particular batch of kernel can be conveniently used with any other batch of the kernel. However varying force applications are to be used depending on the batch due to significant differences in the values of the mechanical properties and end-product of operation the same due to the fact that deformation was significantly the same. The thermal response of any batch will be the same since the thermal properties were significantly the same.

 

http://dx.doi.org/10.4314/njt.v38i2.31

Downloads

Published

2019-03-29

Issue

Vol. 38 No. 2 (2019): NIGERIAN JOURNAL OF TECHNOLOGY, VOL. 38, NO. 2, APRIL 2019

Section

Agricultural, Bioresources, Biomedical, Food, Environmental & Water Resources Engineering

License

The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.

NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.

A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf

 

For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.

 

It is forbidden to publish the same research report in more than one journal.

How to Cite

EVALUATION OF THE ENGINEERING PROPERTIES OF CASHEW KERNEL OBTAINED FROM DIFFERENT PLANTATIONS IN NSUKKA. (2019). Nigerian Journal of Technology, 38(2). https://www.nijotech.com/index.php/nijotech/article/view/1999

Most read articles by the same author(s)