COMPRESSION CREEP MODEL FOR NIGERIA GROWN TERMINALIA IVORENSIS (BLACK AFARA) TIMBER
Keywords:
Black Afara timber, Compression Creep, Creep prediction model, Terminalia ivorensis, Load durationAbstract
Mathematical model of compression creep for Terminalia ivorensis (Black Afara) timber were developed and presented in this paper. One-year creep test was performed in this process on Terminalia ivorensis timber samples. The creep data were fitted to linear, exponential and logarithmic regression models. The coefficients of determination for each of the model was determined. The coefficients of determination of the linear, exponential and logarithmic models were determined as 0.689, 0.650 and 0.941 respectively. Since the logarithmic model has the highest correlation with coefficient of determination of 0.941, it gave the best compression creep prediction model for the Terminalia ivorensis timber.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.