PREDICTION OF INCEPTION LENGTH OF FLOW OVER DIFFERENT STEPPED CHUTE GEOMETRY
DOI:
https://doi.org/10.4314/njt.343.986Keywords:
stepped chute, skimming flow, inception length, prediction, parametersAbstract
This research was performed to develop an inception model to be used over three different chute geometries which was not done by earlier researchers. The inception parameters (roughness Froude number and sine of the chute angles) were determined from the inception data of Munta and Otun. These parameters were analysed using a regression model to form the inception length equation in this study. The results showed that the inception length to the roughness height increases with increase in both roughness Froude number and slope of the chute angle. The results also indicated that for every unit discharge, inclined stepped chute type has the least length of inception compared to the plain and the end-sill chute types; indicating that the point of inception has shifted optimally upstream of the chute in the inclined stepped chute. The developed inception model has insignificant error range values of 0.044-0.89% over the various step chutes under consideration. Inclined step chute is more suitable to be used to safely transmit flood flow downstream of a dam.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.