ANALYSIS OF AN INTELLIGENT TEMPERATURE TRANSMITTER FOR PROCESS CONTROL
DOI:
https://doi.org/10.4314/njt.343.979Keywords:
intelligent transmitter, wireless sensor node, rosemount intelligent temperature transmitter, field bus, process industry, telos B.Abstract
In recent times, transmitters that incorporate microprocessor to perform various intelligent functions have been developed by various manufacturers. This paper presents an overview of the evolution in transmitter technology while highlighting key factors which have influenced the evolution. It also identifies low power microprocessor and analog to digital converters working with the basic sensor circuit as the key propellants in the advancement of transmitter technology. Despite several sensors available in the process control industry, the authors focus on temperature sensors and analyze a typical Rosemount Intelligent Temperature Transmitter (RITT) with a view to identifying and comparing how experimental results vary from established parameters in the datasheet. Simulation results show that the resistance of the RITT’s Resistance Temperature Detector (RTD) varies directly with applied temperature. Percentage error shows acceptable points at -0.04%, 0.04% and -0.1%. For higher percentage error readings, it is necessary to connect a resistor of value between 250? and 1100? between the current loop and the transmitter. The future of transmitter technology is however the wireless sensor node (WSN) incorporating the Sensirion SHT11 temperature sensor.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
