PERFORMANCE OPTIMIZATION OF A CASSAVA PELLETING MACHINE
DOI:
https://doi.org/10.4314/njt.333.818Keywords:
pellets, screw conveyor, mass number, power number, processing time number, density numberAbstract
Cassava pelleting in most developing countries are usually done manually. This process is very laborious, time consuming and unhygienic. A pelleting machine has been recommended because of its low cost, high capacity of providing pelleted cassava as well as relative ease of operation and maintenance. The machine consists of a screw conveyor for conveying the cassava mash through the dies openings, electric motor, pulley drives and belts. A performance optimization of the system was carried out to maximize the solid product recovery, efficiency and throughput of the machine. The optimization results shows that the responses efficiency, throughput and power consumption of the machine were determined as 58%, 75.76kg/hr and 4106.36W respectively. Mathematical models were developed using dimensional analysis. The independent variables such as screw pitch, conveyor speed and bulk density were used to derive the dimensionless parameters used as input variables for the regression analysis. The dependent variables like the mass number, power number and the processing time number were measured and compared to computed values such as their standard errors, percentage errors and coefficient of determination.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.