FM THRESHOLD AND METHODS OF LIMITING ITS EFFECT ON PERFORMANCE
DOI:
https://doi.org/10.4314/njt.261.75Keywords:
FM thresholdAbstract
This paper presents the outcome of the investigative study carried out on threshold effect in FM systems. The study gave a proper insight on how the threshold effect affects the performance of FM systems by giving detailed report on the occurrence. Performance evaluation shows that the threshold is the existence of large noise in the output of the system, which makes signal detection impossible. The effect, as was discovered through analysis, is more serious at very high frequencies as can be seen from the deviational effect noticed on the graph which depicts the presence of noise in the system and it is in-fact a confirmation that noise at that level is frequency dependent. Pre- emphasis and de – emphasis networks were discussed to show how the effect could be controlled in FM systems.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.