EFFECT OF TRACTOR FORWARD SPEED ON SANDY LOAM SOIL PHYSICAL CONDITIONS DURING TILLAGE
DOI:
https://doi.org/10.4314/njt.241.485Keywords:
Forward speed, soil physical conditions, tillage.Abstract
Field studies were conducted at the National Centre for Agricultural Mechanization (NCAM), Ilorin on a sandy loam soil to evaluate the effect of the imposition of different levels of tractor forward speed during tillage on some soil physical properties. The forward speed was varied from 1.0 to 10.6km/h: The depth of tillage was maintained constant at 20cm throughout the operations. The soil physical parameters measured were cone penetration resistance (cone index CI), shear strength (SS), bulk density (BD), moisture content (MC), and clod mean weight diameter (MWD).
Results indicate significant differences in soil physical conditions arising from different levels of tractor forward speed. A forward speed of approximately 7km/h resulted in appreciable amelioration of soil structure as reflected in improvements in the soil strength properties and maximum reduction in clod mean weight diameter. Soil strength properties generally decreased with increasing speed but increased with depth of tillage. A predictive model depicting the most vital soil physical parameters affected by tractor speed was developed
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.