DESIGN, CONSTRUCTION AND EVALUATION OF MOTORIZED OKRA SLICER
DOI:
https://doi.org/10.4314/njt.262.471Keywords:
Okra Slicer, Designed, Fabricated And EvaluatedAbstract
A motorized okra slicer was designed, constructed and tested. It has a capacity of 42.8 kg/hr and efficiency of 95% when compared with the manually operated machine and hand slicing methods. It produces slices of uniform thickness with standard deviation and variance of 0.13 and 0.14, respectively.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.