SPACE VECTOR PULSE WIDTH MODULATION OF A MULTI-LEVEL DIODE CLAMPED CONVERTER WITH EXPERIMENTAL VERIFICATION
DOI:
https://doi.org/10.4314/njt.302.41Keywords:
space-vector modulation, inverters, diode clamped convertersAbstract
This paper presents the analysis of a multi-level diode clamped converter (DCC) which is implemented using space-vector pulse width modulation (SVPWM) technique, widely considered as the most efficient and easily applied modulation technique in most industrial drives and control applications. It also focuses on the step by step development of MATLAB /SIMULINK modeling of the space vector pulse-width modulation and the spectral analysis of the resultant waveforms obtained from the modulation results were carried out. Results of the simulations obtained from DCC using SVPWM were equally presented and analyzed. This paper used generic on-time application method to realize the application time for the zero vector and two adjacent active vectors in determining the switching process of the multilevel DCC, quite unlike the look-up table which is common in this area. To verify the analysis, a small scale experimental work, was carried out. All experimental works were done in the laboratory and the results confirm the simulation results obtained from the SIMPLORER Student version 6 Software used in simulating the un-modulated three-level diode clamped converter.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.