ANALYSIS AND CONTROL OF OFFBOARD BIDIRECTIONAL PLUG - IN ELECTRIC VEHICLE (PEV) CHARGER FOR VEHICLE TO GRID OPERATION
DOI:
https://doi.org/10.4314/njt.374.1873Keywords:
Battery charger, electric vehicle, natural variables, vehicle to gridAbstract
This paper presents an analysis of off board bidirectional Plug in Electric Vehicle (PEV) Charger. Since, normally, the control command for such chargers are given in terms of desired real and reactive power, a model of the system is formulated directly in terms of these variables. A detailed steady state analysis of the system is presented for the entire possible range of operation and for a given battery state of charge (SOC) rather than selecting points of operation a priori. This result shows the various possibilities of the system and informs further structural studies of the system and the design of controllers to meet the desired control objectives.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.