USE OF ENERGY METHOD TO SIMULATE THE PERFORMANCE OF LiBr/H2O ABSORPTION SYSTEM
DOI:
https://doi.org/10.4314/njt.291.144Keywords:
absorption, refrigeration, energy method, simulationAbstract
Absorption refrigeration system provides large potential for reducing heat pollution of the environment. In this paper, a model has been developed for description of a simple LiBr / H2O absorption system in a climatic setting that is amenable to change. The fundamental characteristics and performance index of the system which effects its selection were obtained by using the energy balance method. The simulation of the system was carried out using Engineering Equations Solver. Results of simulated performance of this system and the effects of the initial temperature of a given mass of load on the coefficient of performance, COP of the system are given. The performance of the system increased with increasing initial temperature of the cooling load.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.
How to Cite
