DEVELOPMENT OF U-CHANNEL SCREW JACK FOR VEGETABLE OIL EXTRACTION
DOI:
https://doi.org/10.4314/njt.363.1417Keywords:
Design, U-channel screw jack, vegetable oil extraction, test analysisAbstract
A U-channel screw jack for extracting vegetable oil was developed through design (with Solid works–Computer Aided Design (CAD)) and fabrication processes. A factorial experiment in a Randomized Complete Block Design (RCBD) was used to investigate the effect of heating temperature (50, 60 and 70°C) and heating time (5 and 10 min) on the performance of the machine in terms of oil yield, extraction efficiency and extraction loss with groundnut as the feedstock. Results of the machine design for some of the machine components gave the following values: U-channel structural frame made of mild steel (80 x 160 x 650 mm), compression cap (70 mm) and heater band(3.5kW). Also, the performance evaluation of the machine showed that increase in heating temperature (50 to 70°C) and heating time (5 to 10 min) did not cause the oil yield, extraction efficiency and extraction loss to increase beyond 30%, 48% and 15% respectively. Generally, decrease in oil yield, extraction efficiency and extraction loss occurred at the heating temperature of 70 oC irrespective of the heating time. For future works, other machine and feedstock factors should be incorporated into the performance evaluation process. Also, automation of the machine is recommended.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.