DEVELOPMEMT OF PILOT SCALE DEALUMINATION UNIT OF 2.5 kg METAKAOLIN PER BATCH CAPACITY
DOI:
https://doi.org/10.4314/njt.363.1398Keywords:
Dealumination, metakaolin, reactor, dealuminator.Abstract
A pilot-size dealumination unit to handle 2.5kg of metakaolin per batch was designed and fabricated and test run. The metakaolin was prepared from Kankara kaolin. The metakaolin was completely split into silica and alumina. The silica component which was inert to the sulphuric acid used during the reaction and was obtained as a solid product. While the alumina which reacted with the sulphuric acid was obtained in liquid form as aluminum sulphate, known as alum. The dealumination unit comprises of the dealumination reactor, known as dealuminator, acid holding tank and metakaolin slurry mixing tank. The material of construction selected for the dealumination reactor was stainless steel type 304 lined internally with glass to withstand the corrosive environment of the concentrated sulphuric acid at the reaction temperature > 140°C. The capacity of the componentsare; acid holding tank 5 liters;metakaolin slurry mixing tank 20 liters, with 70 W capacity motor and the dealuminator 50 liters, which had pressure relief valve, pressure gauge (0-10 bars) and temperature gauge (0 - 300°C) on the cover. Woven glass fiber cloth was used as lagging material to minimize heat lossto the surrounding. The purity level of the silica obtained from the reaction was above 95%.The endothermic nature of the dealumination process was void of external heating.
Downloads
Published
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.