DESIGN AND IMPLEMENTATION OF CONVEYOR LINE SPEED SYNCHRONISER FOR INDUSTRIAL CONTROL APPLICATIONS: A CASE STUDY OF CHAMPION’S BREWERIES PLC, UYO
DOI:
https://doi.org/10.4314/njt.353.1141Keywords:
Conveyor belt, DC motor, PID Controller, Speed Synchroniser, Laplace transformAbstract
This paper presents the mathematical modeling of a conveyor mechanism for control applications with Champion Breweries PLC as a case study. The electrical and mechanical sections were modeled separately and then integrated to obtain one composite system. Due to the lack of synchronisation of the conveyor line speed and the speed of action of the empty bottle inspection (EBI), and the full bottle inspection (FBI) units at Champion Breweries, there exists the problem of residue left-over in bottles, cracked bottles on the conveyor line and the non-detection of incorrect liquor level in bottles.Therefore a Proportional Integral Derivative(PID) controller was designed to act as a speed synchronizer in order to eliminate the above mentioned problems.
Downloads
Issue
Section
License
The contents of the articles are the sole opinion of the author(s) and not of NIJOTECH.
NIJOTECH allows open access for distribution of the published articles in any media so long as whole (not part) of articles are distributed.
A copyright and statement of originality documents will need to be filled out clearly and signed prior to publication of an accepted article. The Copyright form can be downloaded from http://nijotech.com/downloads/COPYRIGHT%20FORM.pdf while the Statement of Originality is in http://nijotech.com/downloads/Statement%20of%20Originality.pdf
For articles that were developed from funded research, a clear acknowledgement of such support should be mentioned in the article with relevant references. Authors are expected to provide complete information on the sponsorship and intellectual property rights of the article together with all exceptions.
It is forbidden to publish the same research report in more than one journal.